If you own a First Alert smoke alarm, you should know how to open the battery door on your First Alert smoke alarm. Battery failure, dead batteries, and weak batteries are a common cause for fires across the United States. It is surprising how often people forget or forego changing the batteries on their smoke alarms. Statistically, a home fire starts every 83 seconds in the USA, so you should own a smoke alarm if you want to keep your loved ones and your home safe.
Smoke alarms are a must-have in any home, and it is recommended that you place a smoke alarm on every level of your house. Many people only place a smoke alarm in obvious places, such as in their kitchen or living room. Still, according to the National Fire Protection Association (NFPA), you should place a smoke alarm on each floor of your home and each bedroom. You should also place fire alarms in the attic and basement.
What Is the First Alert Smoke Alarm?
The First Alert Smoke Alarm is a battery-powered smoke alarm that features an ionization sensor. When the alarm is triggered, a loud 85-decibel alarm sounds to alert you. Ionization sensors are rapidly becoming popular in smoke detectors for home use because they are cheap to produce. They are sensitive enough to detect the lesser amounts of smoke that usually go with the beginning of a house fire. Inside the detector is a minuscule amount of americium-241. This element ionizes the oxygen and nitrogen atoms inside the chamber, which produces a continuous electrical current. When smoke enters the chamber, the current is disrupted, which triggers the sound alarm.
Fire Alert has been making trusted, and high-quality home safety products since 1958, and their smoke alarm does not disappoint. When you buy this smoke alarm, it comes with a complete user’s manual and one 9-volt battery so that you can use it right out of the box! If you own this product, you should know how to open the battery door on your First Alert smoke alarm, which will be discussed later in this article.
What Are the Benefits of the First Alert Smoke Alarm?
Here are the benefits that you will enjoy with the First Alert smoke alarm:
Loud Alarm Noise
The First Alert smoke alarm registers at 85 decibels, which is as loud as a power lawnmower! However, the noise is not dangerous to your hearing as 85 decibels is still considered safe.
Low Battery Alert
When the battery is starting to weaken, the First Alert smoke alarm will start to beep continuously to remind you to change the battery.
You can turn off the smoke alarm if it sets off a false alarm or test your unit.
Missing Battery Guard
The battery case design prevents you from closing it without a battery inside, ensuring that you will never install this smoke alarm without a battery.
Tamper-Proof and Theft-Resistant
Once you have mounted this alarm, you will not be able to remove the battery or the alarm without using the proper tools.
10-Year Limited Warranty
The company stands by its product, so you will be able to enjoy ten years knowing that you can have your smoke alarm replaced or refunded if it malfunctions or breaks.
How to Open the Battery Door on First Alert Smoke Alarm
Here is a four-step guide on how to open the battery door on your First Alert smoke alarm:
- Remove your alarm from the mounting bracket using a flathead screwdriver.
- Insert the screwdriver under the locking pinhead and gently lift the battery’s compartment lock. Set aside the locking pin to be able to relock the compartment.
- After checking or replacing the battery, close the door and reinsert the locking pin in place.
- Reattach the alarm into the mounting bracket.
Common Problems You Might Encounter with Your First Alert Smoke Alarm
Your First Alert smoke alarm might give a false alarm, or it might not alarm at all. Here are some of the most common problems that you might encounter with your First Alert smoke alarm:
- The alarm is not responding because the sensor chamber is dirty or dusty.
- Smoke alarm keeps giving false alerts due to high humidity.
- Insects may have crawled into the sensor chamber.
- The battery was not installed in the proper placement or orientation.
If your smoke alarm suddenly goes off after you insert a new battery, do not worry! It is perfectly normal for your First Alert smoke alarm to sound brief when it is powered up for the first time. You can think of it as a “systems check” where the unit is powering up to ensure everything is in working order.
However, if the alarm persists beyond 5-10 seconds, there would be a problem with your battery or unit itself. You can try replacing the battery with a new one because the battery you inserted might not have sufficient power or loose wires within your product. If you have changed the batteries with new ones and the sound is continuing, you may need to contact the company and get the unit replaced. Know more about Door Alarms.
A smoke alarm is one of the essential things in your home to prevent injury, damage, and death by fire, so you need to know how to open the battery door on your First Alert smoke alarm. Luckily, it is a remarkably straightforward process, and all you need is a regular flathead screwdriver. Since the product is designed with the average homeowner in mind, you will be able to feel secure knowing that you will be alerted if there is a fire in your home.