Have you ever experienced getting yourself locked and can’t get any way to escape? In situations like these, picking a deadbolt lock may seem to be the best solution. But, the question is, how to pick a deadbolt lock? It’s quite easy to pick a deadbolt lock. In fact, you would want to replace all your key locks with electronic ones when you discover how simple it is. This doesn’t mean that picking a deadbolt lock does not require skills or practice – it still does – but the technique is so easy that anybody can learn it.
What are Deadbolt Locks?
Among the typical security measures out there, the locking system is considered as the most popular one. Deadbolt locks are security system measures that use a method of rotating the specific key to the lock itself.
The Need for Picking Deadbolt Lock
Deadbolt locks are common and widely used. You can think of learning how to pick a deadbolt lock completely useless. But, it can be life-saving. There are numerous deadbolt lock brands out there, and it is not easy to identify the best deadbolt lock brand. An emergency to enter a room with a deadbolt lockset can occur anytime. Therefore, knowing the correct technique on how to pick a deadbolt lock can save you.
What do you Need to Pick a Deadbolt?
In picking any keyed deadbolt lock, two basic tools can be used. The first one is the pick itself, a long and solid piece of metal or plastic that can easily fit in the keyhole and won’t easily bend if you push it against something.
The other one is the tension wrench created by making a 90-degree curve at the end of another thin, solid piece of plastic or metal. You can create these tools by using household supplies like paper clips, bobby pins, or electrical wires. But bobby pins would plausibly work the best.
You might also need to de-ice the lock during cold weather because you won’t be able to turn it when it’s frozen. You can do so by using a lighter, hairdryer, or heat gun.
The lockset inside the deadbolt lock is consists of a rotating barrel and five spring-loaded pins that perfectly fit into the barrel. The wrench will keep the barrel tense, so it will stop the pins from falling back into the barrel after moving them up and out.
Steps on How to Pick a Deadbolt Lock
Picking a deadbolt lock very much depends on how skilled you are in doing so. Instead of being confined on how to pick a deadbolt lock, you can try generating your technique. Below are some easy steps on how to pick a deadbolt lock.
- Using the short end of the wrench, insert it into the bottom of the keyhole while putting tension to the wrench handle into the direction where the lock turns. Maintain the same pressure while you are picking.
- Poke the pick to the top of the lock and push it until you feel one of the pins. Using the end of the pick, jimmy the pin-up and then push in the pick farther until you reach the nest pin. You will eventually touch one of the pins that’s harder to lift than the others. This is the reason why you require the tension wrench.
- Lift the pin while maintaining tension on the wrench. The barrel will move a little bit when the pin clears the barrel, and that small movement is sufficient to stop it from falling back.
- Continue pushing in the pin a little deeper and jimmying it up until you have lifted all of them. You should be able to turn the lock using the wrench at this point.
No matter how much you prevent it, deadbolt lock doors can still have flaws, and getting yourself locked can happen. However, knowing how to pick a deadbolt lock can be an advantage when situations like this arise. This simple yet life-saving hacks will give you the confidence and prepare you when that time comes. However, this does not mean that you can use this technique whenever, wherever, or for unethical practices. When used decently and only when necessary, these steps on how to pick a deadbolt lock will undoubtedly be beneficial to all. Here’s how to learn more about Deadbolt Locks.